In Lone Tree, a wood stove or fireplace is not decoration — it is real heat through dry, intense cold and big day-night swings. We diagnose on the spot, repair with real parts, and test-fire before we leave. Same-day service, every day, 8 AM to 8 PM.
Your information is kept private and used only for your fireplace service request.
The six services Lone Tree homeowners call us for most — from a gas fireplace that will not stay lit at altitude, to a wood flue loaded with pine creosote that needs a proper cleaning.
Repair
Fireplace Repair
Any fireplace, any failure — diagnosed first, then fixed with the right parts. Smoke stains, a damper that will not seal, a blower gone loud — if it burns, vents or ignites, we repair it.
Get a free estimate
Repair
Gas Fireplace Repair
Pilot out, remote dead, flame weak and lazy — the high-elevation gas calls we run every week in Lone Tree. Pilot that won't stay lit, dead remote, weak or lazy flame: gas systems diagnosed safely and repaired to code.
Get a free estimate
Cleaning & Care
Fireplace Cleaning
Soot, dust and that stale closed-up smell removed from the firebox, glass and burner — the clean that takes a fireplace from a hard winter of daily burning to ready for the next cold snap.
Get a free estimate
Cleaning & Care
Fireplace Inspection
Firebox, flue, venting and controls checked end to end, with a plain-language report. In Lone Tree it is also how crown cracks, cap damage and altitude problems get caught while they are small.
Get a free estimate
Install & Replace
Fireplace Installation
A new gas fireplace or an outdoor fire feature, done right: sizing, venting, gas and electric runs, finishing — one crew, start to first fire. In Lone Tree that often means a high-efficiency insert fitted for real heat, not just looks.
Get a free estimate
Cleaning & Care
Fireplace Service & Maintenance
The annual service that keeps a Lone Tree gas fireplace lighting first try: full clean, burner and pilot service, safety sensors tested, and a test fire before we leave. Fifteen checkpoints, the altitude setup verified, and every sensor tested — done in one visit.
Get a free estimateNeed something else — a damper, a blower, a smoke problem, a bird in the flue? We cover all 27 fireplace specialties. Call (888) 257-9181 and describe it.
A fireplace in Lone Tree works at elevation, in dry cold and wide temperature swings few other regions see. Altitude, pine smoke, snow and long idle months in second homes do the damage here — this is what we check on every visit.
Gas burns differently in thin air. At Lone Tree's elevation, pilot flames run weaker, thermocouples work harder, and venting has to be set up for altitude — a unit adjusted for sea level will soot, struggle and quit early. We check the altitude setup on every gas call, not just the broken part.
Mountain and foothill homes burn what grows here — pine and other softwoods — and softwood smoke lays down creosote faster than hardwood does, especially in slow, overnight burns. In Lone Tree that buildup is the main flue-fire risk we clean out. If you burn daily for heat, an annual cleaning is the minimum, not the maximum.
Late-summer smoke changes how Lone Tree burns. On bad air days, wood burning is restricted and discouraged, and many homeowners lean on gas instead — which is why gas units that sat unused all summer get found out in the smoke season, not winter. We service both, so whichever fuel you rely on is ready.
Mountain air is dry, and dry air carries dust into everything — pilot orifices, burner ports and air shutters included. A gas fireplace in Lone Tree can fail from a dusty pilot alone, with every major part still sound. A thorough cleaning and an altitude check fix most of those calls without replacing a single part.
Lone Tree sits in Douglas County, and the ZIP list at the bottom of this page covers 2 serviceable ZIP codes — 80124 through 80134. The closest served neighbors are Parker, Castle Pines, Centennial, and every one of them is covered by the same crews, the same day, under the same number: (888) 257-9181.
Same-day service, free estimates, licensed & insured — and a fireplace that lights when you click the remote.
Yes. Gas appliances are rated and adjusted for an elevation range, and a unit set up for low elevation will burn dirty, soot the glass, and struggle to keep a pilot at Lone Tree elevation. The gas and air setup has to match the altitude it will actually run at — we check and adjust that as part of any installation or repair.
Please have it checked first. Months sitting empty in Colorado mountain country means animals may have nested in the flue, dust has settled in the pilot, and caps may have taken snow damage — all invisible from the room. An inspection and cleaning before the first fire is the difference between a cozy arrival and a cabin full of smoke.
Follow the local air-quality guidance for that day — on bad smoke days, wood burning is restricted or strongly discouraged across much of Colorado, and adding fireplace smoke to wildfire smoke helps nobody. Many Lone Tree homeowners switch to gas on those days instead. If your gas unit has sat idle, have it serviced before you need to rely on it.
Usually a cold flue. Overnight mountain cold fills the flue with heavy, sinking air, and the first smoke cannot push it up — so it spills into the room until the flue warms. A blocked cap or snow around the vent makes it worse. A tech checks the flue, cap and draft, and shows you a startup routine that warms the flue first.
Worth fixing promptly, yes. A cracked crown lets water into the masonry, and at Lone Tree elevation that water freezes hard, expands, and widens the crack every cycle — small crown damage becomes split masonry faster here than in mild climates. We repair the crown and check the cap and flashing in the same visit, before water reaches the flue.
No — and be wary of anyone who does. Every fireplace fails differently, so a phone price is a guess that changes at your door. Our estimates are free: a tech looks at the actual problem, then gives you one clear price before any work starts.
Fireplace Team is a national company with local technicians serving Lone Tree street addresses across the ZIP codes below — same-day service and free estimates, every day 8 AM – 8 PM. More of Colorado is covered from our Colorado page. The Lone Tree list below covers 2 ZIP codes, 80124 through 80134.
Don't see your ZIP? Lone Tree also uses P.O. Box and single-organization ZIP codes that have no street addresses — call (888) 257-9181 and we will confirm coverage for your street address on the call.
Also serving nearby: Parker, CO · Castle Pines, CO · Centennial, CO · Greenwood Village, CO · Englewood, CO · Littleton, CO.
Message sent.
Thanks — we'll get back to you shortly. Need it faster?
