When a Belvedere fireplace quits, it is rarely random — an igniter tired from idle months, a cap rusted by salt air, creosote from real wood fires, or mortar cracked by movement. We show you what failed, fix it with the right part, and test-fire before leaving.
Your information is kept private and used only for your fireplace service request.
From the post-earthquake inspection to a brand-new outdoor fire feature, these are the six fireplace services Belvedere homeowners book with us.
Repair
Fireplace Repair
Any fireplace, any failure — diagnosed first, then fixed with the right parts. Smoke stains, a damper that will not move, a blower gone loud — if it burns, vents or ignites, we repair it.
Get a free estimate
Repair
Gas Fireplace Repair
The conversion most Marin County wood fireplaces eventually make, and the system we know best. Pilot that won't stay lit, dead remote, weak or lazy flame: gas systems diagnosed safely and repaired to code.
Get a free estimate
Cleaning & Care
Fireplace Cleaning
Soot, dust and that stale closed-up smell removed from the firebox, glass and burner — a clean matched to the unit — creosote and ash for wood, burner and glass service for gas.
Get a free estimate
Cleaning & Care
Fireplace Inspection
Firebox, flue, venting and controls checked end to end, with a plain-language report. One visit, one honest report — what is sound, what is not, and what can wait.
Get a free estimate
Install & Replace
Fireplace Installation
A new gas fireplace or an outdoor fire feature, done right: sizing, venting, gas and electric runs, finishing — one crew, start to first fire. Gas inserts, direct-vent units and outdoor fire features are the Belvedere favorites.
Get a free estimate
Cleaning & Care
Fireplace Service & Maintenance
The annual service that keeps a Belvedere gas fireplace lighting first try: full clean, burner and pilot service, safety sensors tested, and a test fire before we leave. A full clean, burner and pilot service, sensors tested, and a test fire — done in one visit.
Get a free estimateNeed something else — a damper, a blower, a smoke problem, a bird in the flue? We cover all 27 fireplace specialties. Call (888) 257-9181 and describe it.
A fireplace in Belvedere lives with California's mix all at once — ground that moves, air that corrodes or dries, summers that idle it and winters that work it. This is what we actually find here, and what we check on every visit.
A fireplace should be inspected after an earthquake before it is lit again. Movement can crack flue tiles, shift a cap, open mortar joints or damage a gas connector, and none of that is visible from the room. We check the firebox, flue, venting and controls end to end and give you a plain-language report before anyone builds a fire in it.
Older California homes — Spanish-style, craftsman and mid-century — often carry original masonry fireplaces with aging mortar, older dampers and flues built to another era's standards. They are worth keeping and worth checking: cracked joints, tired dampers and worn firebox brick are repairable when they are caught before water and heat widen the damage.
Drought-dry planting makes an outdoor fire feature in California a clearance-and-safety conversation first: what sits near the flame, what the wind carries, and whether burners and valves have survived seasons of sun and dust. We install and service patio fireplaces and fire pits with those clearances checked, not assumed, and we flag plantings and furniture that sit too close.
Plenty of Belvedere buyers inherit a fireplace with no history — original masonry, a conversion nobody documented, or a gas unit that sat idle for years. In seismic country that unknown matters more, not less. An inspection before the first fire tells you exactly what you have, what is sound, and what needs attention before it is used.
Belvedere sits in Marin County, and the ZIP list at the bottom of this page covers 1 serviceable ZIP codes — 94920 through 94920. The closest served neighbors are Tiburon, Sausalito, Corte Madera, and every one of them is covered by the same crews, the same day, under the same number: (888) 257-9181.
Same-day service, free estimates, licensed & insured — and a fireplace that lights when you click the remote.
Yes — before you light it again. Ground movement cracks flue tiles, opens mortar joints, shifts caps and can damage gas connectors, and most of that damage is hidden inside the chimney. An inspection checks the firebox, flue, venting and controls end to end and gives you a plain-language report, so the first fire after a shake is lit in a system known to be sound.
Yes — quietly and constantly. Metal caps, dampers, grates and vent terminations corrode faster in salt-carrying air, and a rusted-through cap lets rain straight down the flue while corroded venting becomes a safety issue. An inspection checks the metal parts most companies skip, so corrosion in Belvedere gets caught while it is still a small repair instead of a replacement.
The common causes are a cold flue at startup, a blocked or undersized flue, a clogged cap, or a house sealed so tightly the fireplace cannot draw — that last one is frequent in newer Belvedere construction. A tech checks them in order, on the spot, and fixes the actual cause instead of selling you parts at random for a pressure problem.
Leave the fireplace off, and if the smell is strong, leave the house and call your gas utility or 911 first. Once it is safe, call us: after any ground movement, a gas smell deserves a connector and valve check before anything else. A faint odor at startup can be a lazy ignition, but a leaking valve or connector is fixed before the fireplace is used again — never after.
Not before an inspection. In Belvedere that fireplace could be original masonry with cracked flue tiles, an undocumented conversion, or a gas unit idle for years — and none of that is visible from the room. One inspection tells you what you have, whether it is safe to light, and what it needs, in a plain-language report you can keep with the house records.
No — and be wary of anyone who does. Every fireplace fails differently, so a phone price is a guess that changes at your door. Our estimates are free: a tech looks at the actual problem, then gives you one clear price before any work starts.
Fireplace Team is a national company with local technicians serving Belvedere street addresses across the ZIP codes below — same-day service and free estimates, every day 8 AM – 8 PM. More of California is covered from our California page. The Belvedere list below covers 1 ZIP codes, 94920 through 94920.
Don't see your ZIP? Belvedere also uses P.O. Box and single-organization ZIP codes that have no street addresses — call (888) 257-9181 and we will confirm coverage for your street address on the call.
Also serving nearby: Tiburon, CA · Sausalito, CA · Corte Madera, CA · Mill Valley, CA · Larkspur, CA · San Anselmo, CA.
Message sent.
Thanks — we'll get back to you shortly. Need it faster?
