When a Redmond fireplace quits in October, it is rarely sudden — rust, damp and creosote have been building since spring. Our techs find what failed, show you the part or the water path, and fix it right, so the fireplace is ready for the long wet season ahead.
Your information is kept private and used only for your fireplace service request.
Repair, cleaning, inspection, installation and maintenance for Redmond — wood fireplaces burning local fir, gas units serviced for the fall, and masonry checked for the rain and shake damage this region deals out.
Repair
Fireplace Repair
Any fireplace, any failure — diagnosed first, then fixed with the right parts. In King County we see the pattern constantly: a unit that sat damp all summer, then failed on the first wet night of fall.
Get a free estimate
Repair
Gas Fireplace Repair
Pilot out, remote dead, flame weak after a damp summer — the Redmond gas calls we run every week. Pilot that won't stay lit, dead remote, weak or lazy flame: gas systems diagnosed safely and repaired to code.
Get a free estimate
Cleaning & Care
Fireplace Cleaning
Soot, dust and that stale closed-up smell removed from the firebox, glass and burner — the full softwood creosote removal a fir-burning fireplace needs after one long season.
Get a free estimate
Cleaning & Care
Fireplace Inspection
Firebox, flue, venting and controls checked end to end, with a plain-language report. In Redmond it is also how rusted caps, failed flashing and crown cracks get caught while they are small.
Get a free estimate
Install & Replace
Fireplace Installation
A new gas fireplace or an outdoor fire feature, done right: sizing, venting, gas and electric runs, finishing — one crew, start to first fire. In Redmond that often means a gas insert in an existing wood firebox, for heat without the hauling.
Get a free estimate
Cleaning & Care
Fireplace Service & Maintenance
The annual service that keeps a Redmond gas fireplace lighting first try: full clean, burner and pilot service, safety sensors tested, and a test fire before we leave. Fifteen checkpoints, a full clean, a rust check, and a test fire — done in one visit.
Get a free estimateNeed something else — a damper, a blower, a smoke problem, a bird in the flue? We cover all 27 fireplace specialties. Call (888) 257-9181 and describe it.
A fireplace in Redmond spends its life wet — rain on the crown, damp in the flue, rust on every metal part — through a long gray heating season. This is what that climate actually does here, and what we check on every visit.
Caps, dampers and metal parts live wet here, and they rust accordingly. A cap in Redmond can rust through quietly for seasons before rain pours straight down the flue, and dampers seize half-open with corrosion. We inspect the metal most companies skip and replace what is failing — before the water damage does the talking.
Chimney tops in King County grow moss, collect needles and leaves, and hold standing damp against the crown and flashing all winter. That blanket of wet debris speeds up the very damage rain starts on its own. We clear the top, check the crown and cap underneath it, and leave the chimney shedding water the way it should.
Summers here are mild, so gas fireplaces sit idle and damp for months — then refuse to light on the first cold, wet night of fall. Dust and moisture settle in pilot orifices and burner ports while corrosion works on valves and igniters. An annual service before the gray season prevents the October repair call entirely.
Buyers across Redmond inherit fireplaces with no history — often in older homes where the chimney has seen decades of rain and more than one earthquake. Nobody can tell you from the living room whether the flue is sound. An inspection before the first fire tells you exactly what you have and what it needs to be safe.
Redmond sits in King County, and the ZIP list at the bottom of this page covers 4 serviceable ZIP codes — 98033 through 98074. The closest served neighbors are Bellevue, Kirkland, Sammamish, and every one of them is covered by the same crews, the same day, under the same number: (888) 257-9181.
Same-day service, free estimates, licensed & insured — and a fireplace that lights when you click the remote.
Do not light the fireplace until it is checked. Rain down the flue usually means a rusted-through cap, a cracked crown, or failed flashing — all common in Redmond after months of wet weather. Water rusts the damper and can push smoke into the room on the next fire. We trace the entry point and repair the source.
At least once a year if you burn regularly — and do not stretch it. The local fuel is fir and pine, and softwood smoke lays down creosote quickly, especially in stoves that smolder low and slow overnight. In Redmond, a hard-working wood unit can build a risky layer in one long season of steady burning.
Usually rust. Dampers live in the wettest part of the system, and in Redmond the rain-season moisture corrodes hinges and linkages until they seize — often half-open, which wastes heat and lets weather in all winter. Sometimes cleaning and freeing the mechanism fixes it; if the metal is rusted through, we replace the damper and check the cap above it.
Yes — gas inserts and log sets are the most common conversion we do in Redmond. An insert is the efficient route: sealed against drafts, remote-lit, and no creosote, ash or hauling fir in from the rain. Start with a free estimate and we will measure your firebox, check the flue, and walk through the options honestly.
Leave the fireplace off, and if the smell is strong, leave the house and call your gas utility or 911 first. Once it is safe, call us: in a damp climate, corroded valves and connectors are a real cause, and a leak is fixed before the fireplace is used again — never after. Do not keep relighting a unit you suspect.
No — and be wary of anyone who does. Every fireplace fails differently, so a phone price is a guess that changes at your door. Our estimates are free: a tech looks at the actual problem, then gives you one clear price before any work starts.
Fireplace Team is a national company with local technicians serving Redmond street addresses across the ZIP codes below — same-day service and free estimates, every day 8 AM – 8 PM. More of Washington is covered from our Washington page. The Redmond list below covers 4 ZIP codes, 98033 through 98074.
Don't see your ZIP? Redmond also uses P.O. Box and single-organization ZIP codes that have no street addresses — call (888) 257-9181 and we will confirm coverage for your street address on the call.
Also serving nearby: Bellevue, WA · Kirkland, WA · Sammamish, WA · Beaux Arts Village, WA · Clyde Hill, WA · Hunts Point, WA.
Message sent.
Thanks — we'll get back to you shortly. Need it faster?
