Fircrest fireplaces fight rain more than cold — months of wet weather driving water into crowns and flashing, rusting caps, and soaking flues that then smell damp at the first fire. Our techs diagnose yours on the spot, fix it with real parts, and leave it lighting first try.
Your information is kept private and used only for your fireplace service request.
Repair, cleaning, inspection, installation and maintenance for Fircrest — wood fireplaces burning local fir, gas units serviced for the fall, and masonry checked for the rain and shake damage this region deals out.
Repair
Fireplace Repair
Any fireplace, any failure — diagnosed first, then fixed with the right parts. If it lights sometimes, clicks without lighting, or quits mid-evening, we trace the fault to the part — not the guess.
Get a free estimate
Repair
Gas Fireplace Repair
The most common fireplace in newer Fircrest homes, and the one fall finds out first. Pilot that won't stay lit, dead remote, weak or lazy flame: gas systems diagnosed safely and repaired to code.
Get a free estimate
Cleaning & Care
Fireplace Cleaning
Soot, dust and that stale closed-up smell removed from the firebox, glass and burner — the clean that clears the mildew smell out of a firebox that sat wet since spring.
Get a free estimate
Cleaning & Care
Fireplace Inspection
Firebox, flue, venting and controls checked end to end, with a plain-language report. In this region we also check for rain damage and earthquake cracks most inspections skip.
Get a free estimate
Install & Replace
Fireplace Installation
A new gas fireplace or an outdoor fire feature, done right: sizing, venting, gas and electric runs, finishing — one crew, start to first fire. In Fircrest that often means a gas insert in an existing wood firebox, for heat without the hauling.
Get a free estimate
Cleaning & Care
Fireplace Service & Maintenance
The annual service that keeps a Fircrest gas fireplace lighting first try: full clean, burner and pilot service, safety sensors tested, and a test fire before we leave. The fall appointment Fircrest regulars book before the rains settle in for the season.
Get a free estimateNeed something else — a damper, a blower, a smoke problem, a bird in the flue? We cover all 27 fireplace specialties. Call (888) 257-9181 and describe it.
A fireplace in Fircrest spends its life wet — rain on the crown, damp in the flue, rust on every metal part — through a long gray heating season. This is what that climate actually does here, and what we check on every visit.
Months of rain test every seal on a chimney in Fircrest. Water works into cracked crowns, tired mortar and failed flashing, then shows up as stains, rust and a damp smell at the fireplace below. We trace the entry point from the top down and repair the actual source — not just the stain it left behind.
Caps, dampers and metal parts live wet here, and they rust accordingly. A cap in Fircrest can rust through quietly for seasons before rain pours straight down the flue, and dampers seize half-open with corrosion. We inspect the metal most companies skip and replace what is failing — before the water damage does the talking.
A flue that sits damp for months grows exactly what you would expect: mildew and a stale, sour smell that the first fall fire pushes straight into the room. In Fircrest that smell is the classic first-fire complaint. A thorough cleaning clears the firebox and flue, and a sound cap and crown keep the damp out afterward.
Summers here are mild, so gas fireplaces sit idle and damp for months — then refuse to light on the first cold, wet night of fall. Dust and moisture settle in pilot orifices and burner ports while corrosion works on valves and igniters. An annual service before the gray season prevents the October repair call entirely.
Fircrest sits in Pierce County, and the ZIP list at the bottom of this page covers 1 serviceable ZIP codes — 98466 through 98466. The closest served neighbors are University Place, Tacoma, Ruston, and every one of them is covered by the same crews, the same day, under the same number: (888) 257-9181.
Same-day service, free estimates, licensed & insured — and a fireplace that lights when you click the remote.
Do not light the fireplace until it is checked. Rain down the flue usually means a rusted-through cap, a cracked crown, or failed flashing — all common in Fircrest after months of wet weather. Water rusts the damper and can push smoke into the room on the next fire. We trace the entry point and repair the source.
Because the flue sat wet for months. Damp creosote and mildew grow in a closed, moist flue over the summer, and the first fire pushes that sour smell straight into the room. A thorough cleaning clears it, and checking the cap and crown keeps rain — and the smell — from coming back next season.
Yes, before the next fire. Masonry chimneys in Washington crack in earthquakes in ways you cannot see from the room: hairline flue cracks, shifted bricks, opened mortar joints. A cracked flue can leak smoke and carbon monoxide into the wall cavity. An inspection checks the firebox, flue and masonry end to end and tells you plainly whether it is safe.
Usually rust. Dampers live in the wettest part of the system, and in Fircrest the rain-season moisture corrodes hinges and linkages until they seize — often half-open, which wastes heat and lets weather in all winter. Sometimes cleaning and freeing the mechanism fixes it; if the metal is rusted through, we replace the damper and check the cap above it.
The moss itself is mostly a messenger: it means the chimney top stays wet, and a top that stays wet is one where crowns crack, mortar softens and caps rust faster. We clear the growth, then check the crown, cap and flashing underneath it — in Pierce County, the damage hiding under moss is usually the real repair.
No — and be wary of anyone who does. Every fireplace fails differently, so a phone price is a guess that changes at your door. Our estimates are free: a tech looks at the actual problem, then gives you one clear price before any work starts.
Fireplace Team is a national company with local technicians serving Fircrest street addresses across the ZIP codes below — same-day service and free estimates, every day 8 AM – 8 PM. More of Washington is covered from our Washington page. The Fircrest list below covers 1 ZIP codes, 98466 through 98466.
Don't see your ZIP? Fircrest also uses P.O. Box and single-organization ZIP codes that have no street addresses — call (888) 257-9181 and we will confirm coverage for your street address on the call.
Also serving nearby: University Place, WA · Tacoma, WA · Ruston, WA · Lakewood, WA · Steilacoom, WA · Fife, WA.
Message sent.
Thanks — we'll get back to you shortly. Need it faster?
