Traditional brick fireplace with a fire burning
Same-day fireplace service in Everett

Fireplace Servicesin Everett, WA

Everett fireplaces fight rain more than cold — months of wet weather driving water into crowns and flashing, rusting caps, and soaking flues that then smell damp at the first fire. Our techs diagnose yours on the spot, fix it with real parts, and leave it lighting first try.

Call (888) 257-9181 See reviews Fastest way in is a call — or send the form and we call you back.
100+ 5-Star Reviews Facebook Instagram Licensed & Insured 10+ Years Experience Same-Day Service

Your information is kept private and used only for your fireplace service request.

Request received.

We'll call you back shortly to confirm your time.

Need it faster? Call now
Fireplace Team — Everett, WA

Every fireplace service, one Everett call

From the first fall no-light call to a brand-new installation sealed against the rain, these are the six fireplace services Everett homeowners book with us, with the same crew and free estimates.

Fireplace opened up for repair with the burner exposed Repair Fireplace Repair

Any fireplace, any failure — diagnosed first, then fixed with the right parts. Smoke stains, a damper rusted stiff, a blower gone loud — if it burns, vents or ignites, we repair it.

Get a free estimate
Gas fireplace burner and logs being serviced Repair Gas Fireplace Repair

The most common fireplace in newer Everett homes, and the one fall finds out first. Pilot that won't stay lit, dead remote, weak or lazy flame: gas systems diagnosed safely and repaired to code.

Get a free estimate
Fireplace being cleaned during a service visit Cleaning & Care Fireplace Cleaning

Soot, dust and that stale closed-up smell removed from the firebox, glass and burner — the full softwood creosote removal a fir-burning fireplace needs after one long season.

Get a free estimate
Technician inspecting the inside of a fireplace Cleaning & Care Fireplace Inspection

Firebox, flue, venting and controls checked end to end, with a plain-language report. In Everett it is also how rusted caps, failed flashing and crown cracks get caught while they are small.

Get a free estimate
New fireplace being installed Install & Replace Fireplace Installation

A new gas fireplace or an outdoor fire feature, done right: sizing, venting, gas and electric runs, finishing — one crew, start to first fire. We handle the whole job — unit, venting, gas line, electric and finish work.

Get a free estimate
Close view of a serviced burner and log set Cleaning & Care Fireplace Service & Maintenance

The annual service that keeps a Everett gas fireplace lighting first try: full clean, burner and pilot service, safety sensors tested, and a test fire before we leave. One visit a year is what stands between Everett homeowners and the October no-light call.

Get a free estimate

Need something else — a damper, a blower, a smoke problem, a bird in the flue? We cover all 27 fireplace specialties. Call (888) 257-9181 and describe it.

Local conditions

Everett fireplaces have rain-country problems

A fireplace in Everett spends its life wet — rain on the crown, damp in the flue, rust on every metal part — through a long gray heating season. This is what that climate actually does here, and what we check on every visit.

Rusted caps, seized dampers

Caps, dampers and metal parts live wet here, and they rust accordingly. A cap in Everett can rust through quietly for seasons before rain pours straight down the flue, and dampers seize half-open with corrosion. We inspect the metal most companies skip and replace what is failing — before the water damage does the talking.

Damp flues, mildew smells

A flue that sits damp for months grows exactly what you would expect: mildew and a stale, sour smell that the first fall fire pushes straight into the room. In Everett that smell is the classic first-fire complaint. A thorough cleaning clears the firebox and flue, and a sound cap and crown keep the damp out afterward.

Moss and debris on top

Chimney tops in Snohomish County grow moss, collect needles and leaves, and hold standing damp against the crown and flashing all winter. That blanket of wet debris speeds up the very damage rain starts on its own. We clear the top, check the crown and cap underneath it, and leave the chimney shedding water the way it should.

Idle summers, fall failures

Summers here are mild, so gas fireplaces sit idle and damp for months — then refuse to light on the first cold, wet night of fall. Dust and moisture settle in pilot orifices and burner ports while corrosion works on valves and igniters. An annual service before the gray season prevents the October repair call entirely.

Everett sits in Snohomish County, and the ZIP list at the bottom of this page covers 4 serviceable ZIP codes — 98201 through 98208. The closest served neighbors are Mukilteo, Mill Creek, Lynnwood, and every one of them is covered by the same crews, the same day, under the same number: (888) 257-9181.

Cold fireplace? Warm answer.

Same-day service, free estimates, licensed & insured — and a fireplace that lights when you click the remote.

Questions

Asked the way Everett asks

Why does my fireplace smell damp and musty at the first fire?

Because the flue sat wet for months. Damp creosote and mildew grow in a closed, moist flue over the summer, and the first fire pushes that sour smell straight into the room. A thorough cleaning clears it, and checking the cap and crown keeps rain — and the smell — from coming back next season.

We felt an earthquake — should the chimney be checked before we use it?

Yes, before the next fire. Masonry chimneys in Washington crack in earthquakes in ways you cannot see from the room: hairline flue cracks, shifted bricks, opened mortar joints. A cracked flue can leak smoke and carbon monoxide into the wall cavity. An inspection checks the firebox, flue and masonry end to end and tells you plainly whether it is safe.

My damper is stuck and hard to move — what is wrong?

Usually rust. Dampers live in the wettest part of the system, and in Everett the rain-season moisture corrodes hinges and linkages until they seize — often half-open, which wastes heat and lets weather in all winter. Sometimes cleaning and freeing the mechanism fixes it; if the metal is rusted through, we replace the damper and check the cap above it.

Can you convert my wood fireplace to gas?

Yes — gas inserts and log sets are the most common conversion we do in Everett. An insert is the efficient route: sealed against drafts, remote-lit, and no creosote, ash or hauling fir in from the rain. Start with a free estimate and we will measure your firebox, check the flue, and walk through the options honestly.

We smell gas near the fireplace — what now?

Leave the fireplace off, and if the smell is strong, leave the house and call your gas utility or 911 first. Once it is safe, call us: in a damp climate, corroded valves and connectors are a real cause, and a leak is fixed before the fireplace is used again — never after. Do not keep relighting a unit you suspect.

Do you give prices over the phone?

No — and be wary of anyone who does. Every fireplace fails differently, so a phone price is a guess that changes at your door. Our estimates are free: a tech looks at the actual problem, then gives you one clear price before any work starts.

Where we work

Everett, WA ZIP codes we serve

Fireplace Team is a national company with local technicians serving Everett street addresses across the ZIP codes below — same-day service and free estimates, every day 8 AM – 8 PM. More of Washington is covered from our Washington page. The Everett list below covers 4 ZIP codes, 98201 through 98208.

98201 98203 98204 98208

Don't see your ZIP? Everett also uses P.O. Box and single-organization ZIP codes that have no street addresses — call (888) 257-9181 and we will confirm coverage for your street address on the call.

Also serving nearby: Mukilteo, WA · Mill Creek, WA · Lynnwood, WA · Snohomish, WA · Lake Stevens, WA · Brier, WA.

CALL US NOW