Gas fireplace with a log set in a living room
Same-day fireplace service in Wilmer

Fireplace Servicesin Wilmer, TX

Most Wilmer fireplaces are gas, and most sit idle through a long, hot summer. Then the first cool front arrives and the pilot will not light. Our techs diagnose yours on the spot, fix it with real parts, and leave it lighting first try.

Call (888) 257-9181 See reviews Fastest way in is a call — or send the form and we call you back.
100+ 5-Star Reviews Facebook Instagram Licensed & Insured 10+ Years Experience Same-Day Service

Your information is kept private and used only for your fireplace service request.

Request received.

We'll call you back shortly to confirm your time.

Need it faster? Call now
Fireplace Team — Wilmer, TX

Every fireplace service, one Wilmer call

From the first-front no-light call to a brand-new outdoor fire feature, these are the six fireplace services Wilmer homeowners book with us.

Fireplace opened up for repair with the burner exposed Repair Fireplace Repair

Any fireplace, any failure — diagnosed first, then fixed with the right parts. Smoke stains, a damper that will not move, a blower gone loud — if it burns, vents or ignites, we repair it.

Get a free estimate
Gas fireplace burner and logs being serviced Repair Gas Fireplace Repair

The most common fireplace in Wilmer homes, and the one we know best. Pilot that won't stay lit, dead remote, weak or lazy flame: gas systems diagnosed safely and repaired to code.

Get a free estimate
Fireplace being cleaned during a service visit Cleaning & Care Fireplace Cleaning

Soot, dust and that stale closed-up smell removed from the firebox, glass and burner — the deep clean that matters most for a fireplace that sat shut through a long, hot summer.

Get a free estimate
Technician inspecting the inside of a fireplace Cleaning & Care Fireplace Inspection

Firebox, flue, venting and controls checked end to end, with a plain-language report. One visit, one honest report — what is sound, what is not, and what can wait.

Get a free estimate
New fireplace being installed Install & Replace Fireplace Installation

A new gas fireplace or an outdoor fire feature, done right: sizing, venting, gas and electric runs, finishing — one crew, start to first fire. New builds and renovations across Wilmer are where most of our new units land.

Get a free estimate
Close view of a serviced burner and log set Cleaning & Care Fireplace Service & Maintenance

The annual service that keeps a Wilmer gas fireplace lighting first try: full clean, burner and pilot service, safety sensors tested, and a test fire before we leave. Built for Wilmer's pattern: long idle summers, then wanted on the first cold night.

Get a free estimate

Need something else — a damper, a blower, a smoke problem, a bird in the flue? We cover all 27 fireplace specialties. Call (888) 257-9181 and describe it.

Local conditions

Wilmer fireplaces have Wilmer problems

A fireplace in Wilmer is not fighting a long winter — it is fighting long hot summers sitting unused, dust and insects in the burner, storm debris, and the occasional hard freeze. This is what we find here, and what we check on every visit.

Idle all summer

A gas fireplace in Wilmer may not run for eight months, and sitting idle is hard on it. Dust settles deep in the pilot orifice, ignition parts age without ever being tested, and the unit fails on the first cool night. An annual service before the season fixes the small causes early.

Storm limbs and downdrafts

Storm season drops limbs, leaves and roofing debris into open flues across Dallas County, and strong wind over the roof can reverse a marginal draft and push smoke back into the room. We clear blockages, check the cap, and diagnose downdrafts by cause instead of guessing at parts.

Red dirt and construction dust

In growing areas around Wilmer, red dirt and construction dust get everywhere — including inside burner compartments and pilot assemblies. Fine dust clogs orifices, coats sensors and makes flames lazy and yellow. A proper cleaning clears the burner, pilot and sensors, and restores a clean, steady flame pattern.

Big day-night swings

Oklahoma weather can swing from a warm afternoon to a cold night in hours, and Wilmer fireplaces get lit, shut off and relit with the swings. That stop-start use is hard on igniters and thermocouples, and it rewards a unit that has been serviced. We test ignition through repeated cycles, not one lucky light.

Wilmer sits in Dallas County, and the ZIP list at the bottom of this page covers 1 serviceable ZIP codes — 75172 through 75172. The closest served neighbors are Hutchins, Ferris, Lancaster, and every one of them is covered by the same crews, the same day, under the same number: (888) 257-9181.

Cold fireplace? Warm answer.

Same-day service, free estimates, licensed & insured — and a fireplace that lights when you click the remote.

Questions

Asked the way Wilmer asks

Why does my fireplace smoke or lose its flame on windy days?

Strong wind over the roof can overpower a weak draft, especially with a missing or damaged cap, a partially blocked flue, or a short vent termination. The fix depends on the cause — clearing the flue, fitting a proper cap, or correcting the venting. We diagnose which one you have instead of selling parts at random.

How often does a Wilmer fireplace need service if we barely use it?

Once a year, even with light use. In Wilmer, an unused gas fireplace still collects dust, insects and heat-aged gaskets, and the first cold front is when neglected units fail. Book the annual service in the fall, before the first front, and the unit should light first try all season.

Can you convert my wood fireplace to gas, or add a gas insert?

Yes. Gas inserts and log sets go into existing fireboxes and are the most common conversion in newer Wilmer homes — sealed, remote-lit and far easier to live with than hauling wood. We measure your firebox, check the flue and venting, and walk through the options on a free estimate before any work starts.

My fireplace remote stopped working — is that a big repair?

Usually not. Remotes fail from dead batteries, a receiver that lost its pairing, or a worn wall switch, and all three are quick diagnoses. If the remote system checks out, the fault sits in the valve or ignition, and we trace it in the same visit and replace only the part that failed.

Water is staining the wall or ceiling near my chimney — is that the fireplace?

Very likely the chimney, yes. A cracked crown, softened mortar joints or failed flashing lets storm rain into limestone and brick masonry, and it shows up as staining, peeling or a musty smell indoors. We trace the entry point from the top down and repair the actual source, not just the stain.

Do you give prices over the phone?

No — and be wary of anyone who does. Every fireplace fails differently, so a phone price is a guess that changes at your door. Our estimates are free: a tech looks at the actual problem, then gives you one clear price before any work starts.

Where we work

Wilmer, TX ZIP codes we serve

Fireplace Team is a national company with local technicians serving Wilmer street addresses across the ZIP codes below — same-day service and free estimates, every day 8 AM – 8 PM. More of Texas is covered from our Texas page. The Wilmer list below covers 1 ZIP codes, 75172 through 75172.

75172

Don't see your ZIP? Wilmer also uses P.O. Box and single-organization ZIP codes that have no street addresses — call (888) 257-9181 and we will confirm coverage for your street address on the call.

Also serving nearby: Hutchins, TX · Ferris, TX · Lancaster, TX · Combine, TX · Seagoville, TX · Glenn Heights, TX.

CALL US NOW