When a Fraser fireplace quits in January, it is rarely random — a thermocouple worn thin, a pilot clogged after idle summer months, or water that froze in the crown and split the mortar. We show you what failed and fix it with the right part.
Your information is kept private and used only for your fireplace service request.
Repair, cleaning, inspection, installation and maintenance — the full fireplace service list for Fraser, with the same crew, free estimates, and service every day.
Repair
Fireplace Repair
Any fireplace, any failure — diagnosed first, then fixed with the right parts. Around Fraser, winter repairs top the list: pilots that drop out, liners cracked by heat and cold, and dampers warped or rusted shut.
Get a free estimate
Repair
Gas Fireplace Repair
Pilot out, remote dead, flame weak and yellow — the Fraser gas calls we run every week of the season. Pilot that won't stay lit, dead remote, weak or lazy flame: gas systems diagnosed safely and repaired to code.
Get a free estimate
Cleaning & Care
Fireplace Cleaning
Soot, dust and that stale closed-up smell removed from the firebox, glass and burner — the glass, gasket and burner detail work a gas fireplace needs after months of steady winter use.
Get a free estimate
Cleaning & Care
Fireplace Inspection
Firebox, flue, venting and controls checked end to end, with a plain-language report. Buying, selling, or just moved into an older Fraser home? The inspection is where the facts come from.
Get a free estimate
Install & Replace
Fireplace Installation
A new gas fireplace or an outdoor fire feature, done right: sizing, venting, gas and electric runs, finishing — one crew, start to first fire. We handle the whole job — unit, venting, gas line, electric and finish work.
Get a free estimate
Cleaning & Care
Fireplace Service & Maintenance
The annual service that keeps a Fraser gas fireplace lighting first try: full clean, burner and pilot service, safety sensors tested, and a test fire before we leave. The autumn appointment Macomb County regulars book before the first cold snap arrives.
Get a free estimateNeed something else — a damper, a blower, a smoke problem, a bird in the flue? We cover all 27 fireplace specialties. Call (888) 257-9181 and describe it.
A fireplace in Fraser works from October to April, then sits idle through humid summer months. Freeze and thaw, wood smoke and deep cold do the damage here. This is what we actually find, and what we check on every visit.
From the first fire in October to the last cold night in April, a Fraser fireplace is not decoration — it is a working appliance for months at a stretch. That much use wears igniters, dries gaskets, and builds creosote steadily, which is why an annual service here is maintenance, not a luxury.
Water gets into a chimney crown, a mortar joint or a hairline crack, then freezes, expands, and pries the masonry wider. Repeat that cycle all winter in Fraser and bricks start to spall, crowns split, and mortar crumbles. We check the crown, joints and flashing on every inspection and point out damage early.
Homes in the lake-effect belts — downwind of the Great Lakes in Michigan, Wisconsin, and northern Illinois and Indiana — can get heavy snow while towns an hour away stay clear. Snow buries caps, adds freeze load to masonry, and melts down open flues in a thaw. A sound, screened cap matters more here.
A gas fireplace in Fraser can sit unused from spring through a humid summer, and the off months are not restful — dust settles in the pilot, insects and debris reach the burner, and moisture works on contacts and valves. That is why so many units refuse the first cold evening in October until they are serviced.
Fraser sits in Macomb County, and the ZIP list at the bottom of this page covers 1 serviceable ZIP codes — 48026 through 48026. The closest served neighbors are Roseville, St. Clair Shores, Warren, and every one of them is covered by the same crews, the same day, under the same number: (888) 257-9181.
Same-day service, free estimates, licensed & insured — and a fireplace that lights when you click the remote.
At least once a year if you burn regularly — and sooner if you burn most evenings through a Fraser heating season. Steady wood fires lay down creosote, and the glazed kind builds fastest from slow, smoldering fires. Cleaning removes that buildup before it can ignite, and the visit also checks the liner, cap and damper.
Water soaks into a crown, a mortar joint or porous brick, then freezes and expands, prying the opening wider each time. Over a few Midwest winters that cycle spalls brick faces, splits crowns, and crumbles mortar joints, and the gaps let more water in. Catching it early is a repair; ignoring it becomes a rebuild.
Usually the thermocouple or thermopile. Those sensors sit in the pilot flame and prove heat before the main burner is allowed gas; when they wear out, the valve shuts the pilot down as a safety measure. Dust in the pilot orifice can starve the flame and cause the same symptom, so we clean and test before replacing parts.
Real enough that cleaning is scheduled around it. Creosote builds on flue walls with every fire, and a hot fire or a stray spark can ignite the glazed layer, turning the flue itself into a fire that cracks liners and damages masonry. Annual cleaning, burning dry wood, and keeping fires hot rather than smoldering all lower the risk.
Idle months are the usual cause. Dust settles in the pilot orifice, insects reach the burner ports, and a thermocouple that was already tired gives up while the unit sits through humid summer weather. Most fall no-light calls are one small part or a thorough service — cleaning, pilot and burner checks, and a test fire before we leave.
No — and be wary of anyone who does. Every fireplace fails differently, so a phone price is a guess that changes at your door. Our estimates are free: a tech looks at the actual problem, then gives you one clear price before any work starts.
Fireplace Team is a national company with local technicians serving Fraser street addresses across the ZIP codes below — same-day service and free estimates, every day 8 AM – 8 PM. More of Michigan is covered from our Michigan page. The Fraser list below covers 1 ZIP codes, 48026 through 48026.
Don't see your ZIP? Fraser also uses P.O. Box and single-organization ZIP codes that have no street addresses — call (888) 257-9181 and we will confirm coverage for your street address on the call.
Also serving nearby: Roseville, MI · St. Clair Shores, MI · Warren, MI · Sterling Heights, MI · Mount Clemens, MI · Eastpointe, MI.
Message sent.
Thanks — we'll get back to you shortly. Need it faster?
