Close view of flames burning in a fireplace
Same-day fireplace service in Edgewood

Fireplace Servicesin Edgewood, KY

Wood, gas and electric — Edgewood homes run all three, and each fails its own way after a humid summer off. We diagnose on the spot, repair with real parts, and test-fire before we leave. Same-day service, every day, with free estimates.

Call (888) 257-9181 See reviews Fastest way in is a call — or send the form and we call you back.
100+ 5-Star Reviews Facebook Instagram Licensed & Insured 10+ Years Experience Same-Day Service

Your information is kept private and used only for your fireplace service request.

Request received.

We'll call you back shortly to confirm your time.

Need it faster? Call now
Fireplace Team — Edgewood, KY

Every fireplace service, one Edgewood call

Repair, cleaning, inspection, installation and maintenance — the full fireplace service list for Edgewood, for older brick chimneys, newer gas units and everything between.

Fireplace opened up for repair with the burner exposed Repair Fireplace Repair

Any fireplace, any failure — diagnosed first, then fixed with the right parts. If it lights sometimes, clicks without lighting, or quits mid-evening, we trace the fault to the part — not the guess.

Get a free estimate
Gas fireplace burner and logs being serviced Repair Gas Fireplace Repair

The call we run most in Edgewood once the first cold snap hits. Pilot that won't stay lit, dead remote, weak or lazy flame: gas systems diagnosed safely and repaired to code.

Get a free estimate
Fireplace being cleaned during a service visit Cleaning & Care Fireplace Cleaning

Soot, dust and that stale closed-up smell removed from the firebox, glass and burner — the full creosote removal a wood burner needs — glaze included — or the burner, glass and pilot service a gas unit needs.

Get a free estimate
Technician inspecting the inside of a fireplace Cleaning & Care Fireplace Inspection

Firebox, flue, venting and controls checked end to end, with a plain-language report. The right call before a working winter — or before lighting a fireplace that is new to you.

Get a free estimate
New fireplace being installed Install & Replace Fireplace Installation

A new gas fireplace or an outdoor fire feature, done right: sizing, venting, gas and electric runs, finishing — one crew, start to first fire.

Get a free estimate
Close view of a serviced burner and log set Cleaning & Care Fireplace Service & Maintenance

The annual service that keeps a Edgewood gas fireplace lighting first try: full clean, burner and pilot service, safety sensors tested, and a test fire before we leave. A full clean, burner and safety checks, and a test fire — done in one visit, good for the season.

Get a free estimate

Need something else — a damper, a blower, a smoke problem, a bird in the flue? We cover all 27 fireplace specialties. Call (888) 257-9181 and describe it.

Local conditions

Edgewood fireplaces have Edgewood problems

Heating season in Edgewood is real but short, and the off-season is long, humid and stormy — a combination that glazes creosote, corrodes metal and idles gas parts into failure. This is what we check on every visit.

Idle all summer, dead by fall

A gas fireplace that sat through months of heat and humidity often refuses the first cold night: dust in the pilot orifice, insects in the burner ports, a thermocouple that gave up quietly over the summer. It is the most predictable call in Edgewood — and an annual fall service prevents it almost every time.

Humidity never takes a season off

Even inland, Edgewood air stays damp most of the year. Dampers rust in place, caps corrode, and a firebox that sits shut all summer grows that stale, closed-up smell. We check the metal parts and the damper on every visit, because humidity damage is quiet right up until water shows on the wall.

Salt air on the shore

In the coastal stretches of Kentucky, salt-carrying air eats chimney caps, dampers and vent terminations years faster than it does inland. A cap that looks tired from the ground may be rusted through at the seams. We inspect the top closely on coastal homes and replace metal before the flue starts taking rain.

Smoke in a tight new home

Newer Edgewood homes are built tight, and kitchen fans and dryers compete with the fireplace for air. The result is a fire that smokes at startup or spills when an exhaust fan kicks on. That is a pressure problem with real fixes — diagnosed by testing the house and the flue together, not by guessing at parts.

Edgewood sits in Kenton County, and the ZIP list at the bottom of this page covers 2 serviceable ZIP codes — 41017 through 41018. The closest served neighbors are Erlanger, Elsmere, Crescent Springs, and every one of them is covered by the same crews, the same day, under the same number: (888) 257-9181.

Cold fireplace? Warm answer.

Same-day service, free estimates, licensed & insured — and a fireplace that lights when you click the remote.

Questions

Asked the way Edgewood asks

How often should a wood fireplace be cleaned here?

After roughly every cord of wood burned, and at least once a year if you burn regularly. Southeast burning is mostly evenings and weekends, and that part-time, low-and-slow pattern builds glazed creosote faster than steady hot fires do — so 'we only use it on weekends' is exactly the case that should not skip a year.

My gas fireplace will not light after sitting all summer — why?

Sitting idle through a humid summer is hard on gas parts. Dust settles in the pilot orifice, insects nest in the burner ports, and thermocouples weaken over the off months. Usually it is one small part or a thorough cleaning — a tech traces the exact cause on the spot and fixes it the same visit.

Can you convert my wood fireplace to gas?

Yes — gas inserts and log sets are the most common conversion we do in Edgewood. An insert is the efficient route: sealed, remote-lit, and it uses your existing chimney as the chase. A log set is the simpler route into an existing wood flue. Start with a free estimate and we will measure and walk through both.

What is glazed creosote, and why does it matter?

It is the hard, shiny form of creosote left by cool, smoldering fires — exactly the evening-and-weekend burning pattern most Edgewood homes follow. Glaze resists a standard sweep, builds in layers, and is highly flammable once a hot fire gets the flue temperature up. Removing it takes the right tools, and knowing it is there takes an inspection.

Do you service outdoor fireplaces and fire pits?

Yes — we install, service and repair outdoor fireplaces and gas fire pits across Edgewood, including the burner, ignition and valve problems that weather exposure causes out here. Outdoor units live in the rain, so they usually need service more often than indoor ones, not less. Ask for a free estimate to get one running again.

Do you give prices over the phone?

No — and be wary of anyone who does. Every fireplace fails differently, so a phone price is a guess that changes at your door. Our estimates are free: a tech looks at the actual problem, then gives you one clear price before any work starts.

Where we work

Edgewood, KY ZIP codes we serve

Fireplace Team is a national company with local technicians serving Edgewood street addresses across the ZIP codes below — same-day service and free estimates, every day 8 AM – 8 PM. More of Kentucky is covered from our Kentucky page. The Edgewood list below covers 2 ZIP codes, 41017 through 41018.

41017 41018

Don't see your ZIP? Edgewood also uses P.O. Box and single-organization ZIP codes that have no street addresses — call (888) 257-9181 and we will confirm coverage for your street address on the call.

Also serving nearby: Erlanger, KY · Elsmere, KY · Crescent Springs, KY · Crestview Hills, KY · Lakeside Park, KY · Villa Hills, KY.

CALL US NOW