Fireplace Servicesin Tinley Park, IL

Deep cold is when the fireplace works hardest and when a marginal part finally fails. A thermocouple worn thin, a thermopile putting out too little voltage, or a pilot orifice narrowed by dust can all hold through a mild week and drop out in a cold snap. We test each part in order and replace only what failed.

Water soaks into a crown, a mortar joint or porous brick, then freezes and expands, prying the opening wider each time. Over a few Midwest winters that cycle spalls brick faces, splits crowns, and crumbles mortar joints, and the gaps let more water in. Catching it early is a repair; ignoring it becomes a rebuild.

Usually the thermocouple or thermopile. Those sensors sit in the pilot flame and prove heat before the main burner is allowed gas; when they wear out, the valve shuts the pilot down as a safety measure. Dust in the pilot orifice can starve the flame and cause the same symptom, so we clean and test before replacing parts.

From the room, usually you cannot — cracked tiles are inside the flue, above the firebox. Signs can include smoke smell in upstairs rooms, pieces of tile in the firebox, or a fireplace that drafts poorly after years of good service. An inspection with a flue camera shows the tile condition directly and gives you a plain-language report.

Real enough that cleaning is scheduled around it. Creosote builds on flue walls with every fire, and a hot fire or a stray spark can ignite the glazed layer, turning the flue itself into a fire that cracks liners and damages masonry. Annual cleaning, burning dry wood, and keeping fires hot rather than smoldering all lower the risk.

No — and be wary of anyone who does. Every fireplace fails differently, so a phone price is a guess that changes at your door. Our estimates are free: a tech looks at the actual problem, then gives you one clear price before any work starts.