Most Inglewood fireplace calls trace back to the place itself: ground movement in the masonry, coastal corrosion, a long hot summer of sitting idle, or smoke that will not draw in a tightly sealed new home. We find the cause on the spot, not the symptom.
From the post-earthquake inspection to a brand-new outdoor fire feature, these are the six fireplace services Inglewood homeowners book with us.
RepairFireplace Repair
Any fireplace, any failure — diagnosed first, then fixed with the right parts. Smoke stains, a damper that will not move, a blower gone loud — if it burns, vents or ignites, we repair it.
The conversion most Los Angeles County wood fireplaces eventually make, and the system we know best. Pilot that won't stay lit, dead remote, weak or lazy flame: gas systems diagnosed safely and repaired to code.
Soot, dust and that stale closed-up smell removed from the firebox, glass and burner — the clean that clears salt-air grime, dust and soot before the first fire of the season.
Firebox, flue, venting and controls checked end to end, with a plain-language report. Worth doing after any shake, and always before lighting a fireplace that is new to you.
A new gas fireplace or an outdoor fire feature, done right: sizing, venting, gas and electric runs, finishing — one crew, start to first fire. Renovations and additions across Inglewood are where most of our new units land.
The annual service that keeps a Inglewood gas fireplace lighting first try: full clean, burner and pilot service, safety sensors tested, and a test fire before we leave. A full clean, burner and pilot service, sensors tested, and a test fire — done in one visit.
Need something else — a damper, a blower, a smoke problem, a bird in the flue? We cover all 27 fireplace specialties. Call (888) 257-9181 and describe it.
Local conditions
Inglewood fireplaces have Inglewood problems
A fireplace in Inglewood lives with California's mix all at once — ground that moves, air that corrodes or dries, summers that idle it and winters that work it. This is what we actually find here, and what we check on every visit.
Seismic country, masonry chimneys
California ground moves, and unreinforced masonry chimneys take it in the mortar joints, flue tiles and crown. Cracks can open inside the flue where nobody sees them, and a damaged flue lets heat and exhaust reach framing. In Inglewood, an inspection after a shake — before the fireplace is lit again — is standard, plain caution, and we check the masonry on every visit.
Inspect after a shake
A fireplace should be inspected after an earthquake before it is lit again. Movement can crack flue tiles, shift a cap, open mortar joints or damage a gas connector, and none of that is visible from the room. We check the firebox, flue, venting and controls end to end and give you a plain-language report before anyone builds a fire in it.
No-burn days and gas conversions
In metro areas, air-quality rules restrict wood burning on bad-air days, so the fireplaces that work every evening are gas. That is why gas inserts and log sets are the common conversion in Inglewood: sealed, remote-lit, usable on no-burn days, and they use the existing chimney as the chase. We measure the firebox and walk through the options on a free estimate.
Tight new homes, downdraft smoke
Newer sealed construction in Inglewood holds its air so tightly that a fireplace can struggle to draw, spill smoke at startup, or pull a downdraft down a cold flue. The fireplace is often fine — the house pressure is the problem. We diagnose the draw properly instead of selling parts, and correct the cause we actually find.
Inglewood sits in Los Angeles County, and the ZIP list at the bottom of this page covers 6 serviceable ZIP codes — 90301 through 90311. The closest served neighbors are Hawthorne, El Segundo, Lawndale, and every one of them is covered by the same crews, the same day, under the same number: (888) 257-9181.
Cold fireplace? Warm answer.
Same-day service, free estimates, licensed & insured — and a fireplace that lights when you click the remote.
Should I have my fireplace inspected after an earthquake?+
Yes — before you light it again. Ground movement cracks flue tiles, opens mortar joints, shifts caps and can damage gas connectors, and most of that damage is hidden inside the chimney. An inspection checks the firebox, flue, venting and controls end to end and gives you a plain-language report, so the first fire after a shake is lit in a system known to be sound.
My chimney is older unreinforced masonry — what should I watch for?+
Cracked or missing mortar, leaning or separated sections, cracked flue tiles and a split crown are the warning signs, and earthquakes and freeze-thaw cycles both widen them over time. Water follows the cracks in, and heat follows them out toward framing. We check the masonry on every inspection in Inglewood and tell you plainly what is repairable and what needs a mason's rebuild.
Does coastal salt air really damage a fireplace?+
Yes — quietly and constantly. Metal caps, dampers, grates and vent terminations corrode faster in salt-carrying air, and a rusted-through cap lets rain straight down the flue while corroded venting becomes a safety issue. An inspection checks the metal parts most companies skip, so corrosion in Inglewood gets caught while it is still a small repair instead of a replacement.
My gas fireplace sat all summer and now it won't light — why?+
Sitting idle through a hot California summer is hard on a gas fireplace. Dust settles in the pilot orifice, insects nest in the burner ports, and a thermocouple or igniter that was already tired gives up over the off months. Most of the time it is one small part or a thorough cleaning — a tech traces the exact cause on the spot and fixes it in the same visit.
We smell gas near the fireplace — what now?+
Leave the fireplace off, and if the smell is strong, leave the house and call your gas utility or 911 first. Once it is safe, call us: after any ground movement, a gas smell deserves a connector and valve check before anything else. A faint odor at startup can be a lazy ignition, but a leaking valve or connector is fixed before the fireplace is used again — never after.
Do you give prices over the phone?+
No — and be wary of anyone who does. Every fireplace fails differently, so a phone price is a guess that changes at your door. Our estimates are free: a tech looks at the actual problem, then gives you one clear price before any work starts.
Where we work
Inglewood, CA ZIP codes we serve
Fireplace Team is a national company with local technicians serving Inglewood street addresses across the ZIP codes below — same-day service and free estimates, every day 8 AM – 8 PM. More of California is covered from our California page. The Inglewood list below covers 6 ZIP codes, 90301 through 90311.
903019030290303903049030590311
Don't see your ZIP? Inglewood also uses P.O. Box and single-organization ZIP codes that have no street addresses — call (888) 257-9181 and we will confirm coverage for your street address on the call.